Machines

Pile Driver Machine

Suitable for large size projects. Self-propelled crawler pile driving machine with installing capacity of around 300 pile a day. Unique machine for screwing, ramming, predrilling and using pike functionality. Increased accessibility due to rubber tracks.

  • 8 levers provide precise machine positioning
  • Strong hydraulic system with cast-iron pump and a flow rate of 90l/min at 190 BAR
  • Pile inclination range of +/- 15 degrees both transverse of longitudinal
  • Folding column with extractable supporting foot on column base for a safe pile extraction
  • Post drilling capacity 16x12x290 cm
  • Installation of screw vertically and/or at an angle of max. 15 degrees
  • Screw driving range length 209 cm
  • Controllable and measurable torque and thrust force
  • During screw installation hydraulic pressure is digital recorded
  • Maximal installation torque 5300 Nm
  • Maximum capacity: up to 300 screws per day
  • Accessories: GPS
  • Total weight: 2100 kg

Pre-drilling system

by specially designed steel spike. Easily pre-drill holes in extra dense soils.
Pre-drilling system

Down drill equipment

special rotary pneumatic hammer. Drill every kind of hard soil, rock, concrete even with steel reinforcement.
Down drill equipment

Installation Mast

Installation Mast

Suitable for medium sized projects. Wall hydraulic mast attachment for mounting and excavator exceeding 3,5 tons to all skid steers, bobcats, etc.

  • Installation of screw vertically and/or at an angle
  • Screw driving length: 250 cm
  • Controllable and measurable torque and thrust force
  • Digital torque reader: provides digital recording of hydraulic pressure when installing screw
  • Maximum capacity: 200 screws per day
  • Accessories: GPS, Drill head, Torque reader, Quick attach ISO
  • Torque: 5000 Nm
  • Total weight: 370 kg
Installation Mast

Gearbox set 1:150

Gearbox set

Suitable for small size installations. Hand tool for installation of professional screws with SDS PLUS drilling machine.

  • Installation of screw vertically and/or at an angle
  • Screw driving depth: 150 cm (1.5 meters)
  • Multiplying rate: 1:156
  • Maximum capacity: Up to 50 screws per day
  • Maximum torque: 4000 Nm
  • Accessories: GPS, Drill head, Torque reader, Quick attach ISO
  • Total weight: 37 kg
Gearbox set

Testing machine

Testing machine

Used to evaluate stability. Device for measuring vertical and horizontal tensile strength in any given soil type. Measured with precise digital recording.

  • Works in combination with Pile driver machine
  • Direct connection to laptop by USB-cable
  • Accessories: GPS
  • Total weight: 565 kg